https://www.cutoutandkeep.net/projects/poly-apples • Posted by Craftie Auntie
Obsessed with Polymer clay, obsessed with Twilight, so, I've been making apples.
Obsessed with Polymer clay, obsessed with Twilight, so, I've been making apples.
Depending on if you want to cut(bite) into the apple, to show the center, or just have a red(or green) apple, it will vary how you will proceed. A solid RED apple, or a White center, knead an amount of clay, depending on how large you want the apple to be, until soft.
Roll the clay into a ball.
Gently smoosh down one side of the circle. One side will be smaller than the other. Try to keep the top rounded, and the bottom flatter.
If you did it solid Red skip down to step ___ If you did it in White continue to the next step
Roll out a very thin layer of Red clay
Set the apple down, and eye about how much you will need, and use a knife to trim away the larger excess.
Carefully wrap the red around the white, and smooth it out with your fingers. Do your best not to smoosh up the shape.
Use a small flat tipped object (I've used a nail, a paint brush, and an actual clay tool) and carefully make an indentation in the top of the apple, for the stem.
Roll out a small piece of brown or green clay, into a little stem shape.
Stick the stem into the hole and use whatever you used to create the hole in the top, to push it down gently. If you want to make it into a bead, pierce a hole through it with needle (or something similarly small) straight down through the top, or the side.