Polk A Dot Bows

So cute, so swell, all's TapeSwell.

Posted by jesika_galaxia

About

Super easy and cute! TapeSwell packaging tape is SO PRETTY and easy to work with.

Share

You Will Need (9 things)

  • Ruler
  • Xacto Knife
  • Scissors
  • Scrap Lace
  • Pencil
  • Fine Tip Black Sharpie to mark your measurements
  • Tape Swell
  • Jewelry Findings such as barrel pins, chains, headbands
  • E6000 Glue only if you plan on making a brooch, hairclip, or headband

Steps (7 steps, 20 minutes)

  1. 1

    Gather all of your tools. The lace pictured here was gifted to me, so I do not know what brand it is. :(

  2. 2

    The is for a LARGE bow.

    Measure out 4 pieces of tape about 3 1/4"-3 1/2" long. Use the fine tip marker to mark it, if need be.

  3. 3

    After you have the 4 pieces, take 2 of them and stick them together. The pieces need to be horizontal and the long edge should overlap about 1/4". Do the same with the other 2 pieces.
    You can use an xacto knife to trim up any edges and gently pop any air bubbles you might find. The tape needs to be nice and smooth.

  4. 4

    Next cut a thin strip (about 3" long, 1/4" wide), this will be used as the center of the bow. Fold the tape sheet accordion style. Wrap the strip snugly around the center of the sheet. And you're done! :D

    **You can save the rest of the tape for other bows or cover the edges for a cleaner look.**

  5. 5

    If you want to make a LITTLE bow, just cut 2 pieces of tape 2 1/4"-2 1/2" long. Assembly like the large bow and you're done! :D

  6. 6

    I fancified (is that even a word??) most of the bows with some scrap lace I had.
    You add the lace between the tape.(Make sure to press hard!)
    You can give it a fuller lace edge or cut the lace in half for "just enough" lace.

  7. 7

    Now that you have the bows, do whatever you want with them! Add them to a headband (my daughter the model, lol), glue it to a pin or clip, or you can thread a chain or satin necklace through it. :)

    Enjoy the whimsy of the bows.