here are the measurements for pencil holder:
cut 5 pieces then work 2 pieces and 3 pieces unworked at 20 holes in height and 50 holes in length.
cut 16 pieces, all pieces unworked at 20 holes in height and 10 holes in length.
cut one piece 10 holes width and 50 holes in length for bottom of top holders.
all is done with 7 count mesh.
here the measurements that i came up with for the color pencil holder as follows:
there are 5 pieces that are 20 holes in height by 50 holes in length. this 5 pieces would include 3 pieces that are unworked and 2 pieces worked.
there are 16 pieces that are 20 holes in height by 10 holes in length. this 16 pieces would include the divider pieces which is all unworked.
the last piece is 10 holes wide by 50 holes in length and this piece is placed on the bottom of the top color pencil holder and unworked.
hello everyone. here the measurements that i came up with for the color pencil holder as follows:
there are 5 pieces that are 20 holes in height by 50 holes in length. this 5 pieces would include 3 pieces that are unworked and 2 pieces worked.
there are 16 pieces that are 20 holes in height by 10 holes in length. this 16 pieces would include the divider pieces which is all unworked.
the last piece is 10 holes wide by 50 holes in length and this piece is placed on the bottom of the top color pencil holder and unworked.
hello everyone. here the measurements that i came up with for the color pencil holder as follows:
there are 5 pieces that are 20 holes in height by 50 holes in length. this 5 pieces would include 3 pieces that are unworked and 2 pieces worked.
there are 16 pieces that are 20 holes in height by 10 holes in length. this 16 pieces would include the divider pieces which is all unworked.
the last piece is 10 holes wide by 50 holes in length and this piece is placed on the bottom of the top color pencil holder and unworked.
I like the color pencil holder. I am going to try to make a pattern from the pictures, if I can then I will post it for everyone who wants the pattern.
Moved recently and don't have any yarn now. V___v But I might get some cause I'm picturing a smaller version (more like a little pencil cup) for my eyeliner pencils and makeup brushes and such! Thanks for sharing and giving me some inspiration.
cut 5 pieces then work 2 pieces and 3 pieces unworked at 20 holes in height and 50 holes in length.
cut 16 pieces, all pieces unworked at 20 holes in height and 10 holes in length.
cut one piece 10 holes width and 50 holes in length for bottom of top holders.
all is done with 7 count mesh.
there are 5 pieces that are 20 holes in height by 50 holes in length. this 5 pieces would include 3 pieces that are unworked and 2 pieces worked.
there are 16 pieces that are 20 holes in height by 10 holes in length. this 16 pieces would include the divider pieces which is all unworked.
the last piece is 10 holes wide by 50 holes in length and this piece is placed on the bottom of the top color pencil holder and unworked.
there are 5 pieces that are 20 holes in height by 50 holes in length. this 5 pieces would include 3 pieces that are unworked and 2 pieces worked.
there are 16 pieces that are 20 holes in height by 10 holes in length. this 16 pieces would include the divider pieces which is all unworked.
the last piece is 10 holes wide by 50 holes in length and this piece is placed on the bottom of the top color pencil holder and unworked.
there are 5 pieces that are 20 holes in height by 50 holes in length. this 5 pieces would include 3 pieces that are unworked and 2 pieces worked.
there are 16 pieces that are 20 holes in height by 10 holes in length. this 16 pieces would include the divider pieces which is all unworked.
the last piece is 10 holes wide by 50 holes in length and this piece is placed on the bottom of the top color pencil holder and unworked.
CO + K User