https://www.cutoutandkeep.net/projects/perler-bead-3d-dice • Posted by Miss.Jackie.Ann
Here is a fun perler bead craft to make.
Here is a fun perler bead craft to make.
You will need: 197 Perler beads of the main color 21 Perler beads of the color of second color A large square pegboard And of course you will need ironing paper and an iron
Place the beads on the peg board the same way I have mine in the picture. Try not to iron them to much or they won't snap together properly.
The 1 will be the top, the 6 will be the bottom, and the 3, 5, 4 and 2 will wrap around the sides, with the 2 meeting the 3 at an edge. As shown in the picture
Join the 4 and the 6 together at a right angle, using the front of the 6 side as the bottom of the cube and the 4 facing you. It will take some coaxing to get the pieces to snap together. It may help to push on the flat side of a bead with the eraser end of a pencil to help force it int the gap.
Continue to add sides which connect to the bottom. The 2 will connect with the 4 and 6. The 3 will connect with the 2 and the 6. The 5 will connect to the 3, 6 and 4. Finally, add the 1 to close the cube.