Perler Bead 3 D Dice
Let's roll
Posted by Miss.Jackie.Ann
About
Here is a fun perler bead craft to make.
Share
You Will Need (4 things)
- Pegboard large
- Perler Beads
- Iron
- Ironing Paper
Steps (5 steps, 20 minutes)
-
1
You will need:
197 Perler beads of the main color
21 Perler beads of the color of second color
A large square pegboard
And of course you will need ironing paper and an iron -
2
Place the beads on the peg board the same way I have mine in the picture.
Try not to iron them to much or they won't snap together properly.
-
3
The 1 will be the top, the 6 will be the bottom, and the 3, 5, 4 and 2 will wrap around the sides, with the 2 meeting the 3 at an edge. As shown in the picture
-
4
Join the 4 and the 6 together at a right angle, using the front of the 6 side as the bottom of the cube and the 4 facing you. It will take some coaxing to get the pieces to snap together. It may help to push on the flat side of a bead with the eraser end of a pencil to help force it int the gap.
-
5
Continue to add sides which connect to the bottom. The 2 will connect with the 4 and 6. The 3 will connect with the 2 and the 6. The 5 will connect to the 3, 6 and 4. Finally, add the 1 to close the cube.