Overdrive Pedal

Modeled from MXR GT-OD (an overdrive guitar pedal)

https://www.cutoutandkeep.net/projects/overdrive-pedal • Posted by Heather M.

A gift for my boyfriend + lead guitarist. It is modeled from a pedal that he wanted to buy for some time. (http://images.google.com/images?um=1&hl=en&q=mxr+overdrive+gt-od&btnG=Search+Images)

You will need

1 Felt 3 Guitar String sHeader(ring) 1 A tiny piece of Paper 1 Tiny Tube

Project Budget

Time

Difficulty

Description

A gift for my boyfriend + lead guitarist. It is modeled from a pedal that he wanted to buy for some time. (http://images.google.com/images?um=1&hl=en&q=mxr+overdrive+gt-od&btnG=Search+Images)

Instructions

1. 

   Study the pedal. Cut out the felts for basic cube shape. Make a cube by sewing the pieces up.

2. 

   On top, for the 'tone knobs', use the tiny ring thing from (broken) guitar strings. (It might be a little difficult to cut them off from the guitar strings.)

3. 

   For the 'step-on switch', any tube-like object will do. cut a tiny hole in the top side. Stabilize it from inside.

4. 

   Stitch them up. I also added the 'input/output' hole on each side, just by sewing some stitches. The whole thing is very tiny, because it has to go with the size of those'knobs'.

5. 

   Make a special 'user manual' for it.

6. 

   Hooray!!