No Sew Boho Upholstered Chair

E-6000 Fabri-Fuse Colorful piping or cord Heavy cotton fabric Scissors & pencil Straight pins Fringe Large flat area to cut Embroidered Suzani Blanket
Watch this quick video to see exactly how I did it!
1. Pin heavy cotton fabric over sections of the chair, one section at a time and pencil the shape *Use the inside of the piping or seam as your guide 2. Label each pattern piece so you know exactly where it is on the chair 3. Repeat on the arms, seat, back and base of the chair making sure to ADD and extra 2" around the base of each pattern (on the bottom of the chair) 4. Carefully cut out each piece along the drawn lines 5. Repin the cut pieces on the chair to make sure that it fits properly *Trim if you have to, but make sure the pieces are perfect 6. & 7. Layout and pin all of the pieces for the chair on the fabric and then cut *Make sure arms are mirrored in the pattern pin everything before you cut to avoid mistakes 8. 9. & 10. Pin the cut pieces to the chair and then glue them to the chair one section at a time with E-6000 Fabri-Fuse *Keep them pinned until they are dry 11. & 12. Repeat with all sections making sure to add extra pins around the curves and glue around all of the edges of each piece 13. Remove the feet of the chair and glue the extended fabric under the chair 14. glue piping or cord in the crease between the piping and the fabric to cover the raw edges *Pin this in place until it dries 15. Pin and glue trim around the base of the chair Done!
One final look!