https://www.cutoutandkeep.net/projects/neon-glitter-magnets • Posted by Cassandra L.
This project is super easy, and the best part is that you don’t even need to use JUST glitter! Grab some washi tape, beads, paint - anything that you can stick or glue on will be perfect for this project.
This project is super easy, and the best part is that you don’t even need to use JUST glitter! Grab some washi tape, beads, paint - anything that you can stick or glue on will be perfect for this project.
Put a small amount of glue on one side of the disk and spread it into a thin, even layer with your paintbrush. If you would like cover part of the wood, mark off areas with washi tape before you brush on the glue.
Immediately sprinkle with glitter. Wait for 30 seconds and then lightly press down on the glitter to get as much into the glue as possible. Allow to sit until completely dry.
One the front is dry, attach one magnet using super glue to the back. Let dry according to the manufacturers instructions and you have Neon Glitter Magnets! Optional: Once dry, spray with one or two coats of a clear acrylic sealer.