Our 1st book is out now • Find out more & order a copy »
Follow these steps
1. Pair with some cut off shorts and flip flops!
Gather materials and plug in your iron.
Lay glitter strip on top of tee. Leave a little bit extra on either side. We will cut the ends off later :)
Make sure the stripe is straight along the front of the tee. Then lay a piece of paper over the glitter strip. Iron on top for about 30 seconds. Repeat!
Make sure the glitter strip is secure on the tee before we cut off the access material. Cut right next to the side seam as shown. Iron on top of the end to make sure it's on good!
This is what the side should look like.
Place applique wherever you would like it to appear on the tee.
That looks like a good spot!!!
Place a piece of paper over the applique and iron for 35 seconds. Do this twice!
Turn your tee inside out.
Iron the tee inside out. We want to make sure that the glue adhesive on the strips and applique is melted, leaving them attached the tee. Iron over the inside out tee for 40 seconds. Repeat.
Try it on!!