About
Turn Rags to Royalty
Using an old tin mop bucket, create a bed crown to go over a baby crib or for a bed canopy with drapes. Can you believe that used to be an old mop bucket?
-
Key West Witch favorited Mop Bucket Bed Crown
12 May 15:24
-
Key West Witch added Mop Bucket Bed Crown to Crafts General
21 Mar 01:54
-
Tracy F. favorited Mop Bucket Bed Crown
05 Mar 18:19
-
Arileidy S. favorited Mop Bucket Bed Crown
11 Jan 21:35
-
Denise J. favorited Mop Bucket Bed Crown
23 Jan 13:27
-
Taylor K. favorited Mop Bucket Bed Crown
28 Oct 23:56
-
Heather W. favorited Mop Bucket Bed Crown
17 Oct 22:40
-
Simmy favorited Mop Bucket Bed Crown
22 Jun 06:14
-
Mark M. added Mop Bucket Bed Crown to Elle's room
03 Jun 11:16
-
Jenee Nicole added Mop Bucket Bed Crown to For Kat
28 Apr 05:15
-
Step 1Find a new or used tin bucket and measure out crown points evenly with the circumference of the bucket. Draw out points with a sharpie.
-
Step 2Using tin snips, carefully cut along your crown point sharpie lines.
-
Step 3Stick styrofoam balls on the tips of the crown, then spray paint completely silver. Take your two other colors and lightly spray gold and copper giving a gradient look.
-
Step 4Hot glue round wax crayon to the center of each points of the crown. Spray them with paint.
-
Step 5Hot glue rhinestones to the crayon rounds.
-
Step 6Optional, use rhinestone strips and write out monogrammed style lettering to the center of the crown.
-
Step 7Cut 1.5 wood board to an appropriate width for the crown and bend back sides of crown and bolt to wood board. (You will have to drill a hole in the tin with a metal drill bit.)
-
Step 8Mount to wall studs using long wood screws through the wood board. Add curtain rod and drapes and walla! Royal!
Comments
1
Recycled Books »
Magic Catalog
