Map Of Australia Cushion Tutorial

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Finished size: The cross hatch quilting shrinks the cushion front and back in, to make a perfect fit for a 16” (40cm) cushion insert.

• 

  Step 2

  CUTTING:

  Cushion Front:

  Cut 1 12½” x 12½” square Linen fabric for centre square

  Cut 2 3¼” x 12½”strips fabric for side borders

  Cut 2 3¼” x 18” strips fabric for top & bottom borders

  Fabric piece at least 9” x 10” for the Map of Australia

  Cushion Back: Cut 1 18” x 18” square Linen fabric

  Batting: Cut 2 18” x 18” squares

• 

  Step 3

  CONSTRUCTION ¼” seam allowance except for outer seams which are ½”.

• 

  Step 4

  Firstly position and sew the side borders in place, and then the top and bottom borders.
  Press to the Border.

• 

  Step 5

  Trace the Map of Australia (don't forget Tasmania) onto the fusible webbing, and remember to reverse the image. Roughly cut out the Map of Australia shape and then fuse it onto the back of the fabric selected. Carefully trim around the Map of Australia shape, remove the backing paper and position in the centre of the made cushion front. Iron to fuse in place.

• 

  Step 6

  Choose a thread to match the Map of Australia fabric and raw edge applique (which means just using a normal sewing stitch), around the edges of the Map of Australia shape. Sew as close to the raw edge as possible, and sew around three times.

• 

  Step 7

  Sew as close to the raw edge as possible, and sew around three times.

• 

  Step 8

  Baste the batting and the cushion top together with spray baste.
  Mark the first two diagonal quilting lines with a Hera marker.

• 

  Step 9

  Put your walking foot onto your sewing machine and sew the first diagonal quilting row. Stopping at the Map of Australia. Sew the second diagonal quilting row.

• 

  Step 10

  Set your machine walking foot with a 1” seam guide preferably on the left side of the quilting foot, and sew rows 1” apart, working out from the first diagonal rows sewn. If you do not have a seam guide on you walking foot mark all the quilting lines 1” apart with the Hera marker. Cross hatch the entire cushion top.

• 

  Step 11

  Baste the Backing fabric and batting square together, mark the diagonal lines with your Hera marker as before, and then 1” cross hatch the entire back of the cushion.
  Now the back and front are completed it is time to sew the cushion together. There is a ½” seam allowance around the entire cushion. Trim any excess batting, around both the cushion top and cushion back. Neaten the the edges (with a zig zag stitch or overlocker) of both the front and back pieces where the zipper will be placed. We placed the zipper at the bottom of the Map of Australia.
  Pin the two neaten seams together and using a ½" seam allowance sew in 3" at both ends of the seam.
  Please note: I have used the images from the Kangaroo Cushion Tutorial to show how to insert a zipper. I did this as the process is exactly the same.

• 

  Step 12

  Press the seam open along the entire length of the seam firstly from the wrong side to ensure the ½" seam allowance and then from the right side.

• 

  Step 13

  With the zipper closed place it under the pressed seam and pin the zipper in place.

• 

  Step 14

  Try to keep the zipper teeth directly under the center of the seam and the pins in the directions you will be sewing.

• 

  Step 15

  Attach your machine zipper foot with thread to match cushion fabric and start to sew at one end. The idea is to use the zipper foot as a guide to keep the line of stitching about ¼” away from the zipper teeth. When you reach the zipper pull, stop sewing, leave the needle down in the fabric and lift the foot. Carefully pull the zipper open for a few inches sew along a while and then reclose the zipper. Sew across the end of the zipper taking care to catch the end of the zipper fabric but not the metal end, complete the other side and end.

• 

  Step 16

  Once the zipper is sewn in, leave it open, and pin the back and front of the cushion together. Sew around with ½” seam allowance. Trim the fabric bulk from the corners and pull the cushion to the right side. Place cushion insert inside cushion and admire your work.

Comments

Leave your comment