Magic Slider Atc Card

Let the Magic begin

https://www.cutoutandkeep.net/projects/magic-slider-atc-card • Posted by Artistically

So this is a fantastic way to fascinate those people you trade with ... a card which is able to change colors ... totally magical. For the cards please use the sizes of ATC cards, which are 8,9 x 6,4 cm. And if you need some more information, just ask.

You will need

Tracing Paper Cardboard Pens Glue Paper

Project Budget

Time

Difficulty

Description

So this is a fantastic way to fascinate those people you trade with ... a card which is able to change colors ... totally magical. For the cards please use the sizes of ATC cards, which are 8,9 x 6,4 cm. And if you need some more information, just ask.

Instructions

1. 

   First draw 6 ATC cards in this way on thick cardboard paper

2. 

   Now you need to cut the left and the right cards in the 2nd row.

3. 

   By the way ... here you are able to see the measurements I used. Because of the several paper layers I used the size of 8,9 x 6,3, so it will fit into the ATC Folders to collect them.

4. 

   Here you can see that I I have cutted the inner part I have marked before.

5. 

   When you are done also cut a hole into the upper part, so you will be able to get the inner part out at the end.

6. 

   Now it is time to glue first put the bottom part up and draw a long glue line at the bottom of this piece.

7. 

   Now fold the left part to this middle part and press it to the glue line you have made.

8. 

   Now you need to do the same with the right part only ... and if you want you can also cut it in this way.

9. 

   When you are done the back part should look like this.

10. 

    Here you can see that now you have got two different pockets.

11. 

    The finished front part.

12. 

    Here I have forgotten to take a picture of the step before. But it is also very simple to explain. You draw a ATC Card on a normal paper and on a tracing paper, too. Then you cut it into a "T", but please make sure that the T is a bit wider than the hole you cutted before. Glue both parts together at the lower part of the "T".

13. 

    Now it is time for painting. First start to paint the something on the normal paper and then trace the lines only on the tracing paper.

14. 

    Here you can see how both look like.

15. 

    Then you need to put the finished "T" only into the two pockets you have made. The transparent "T" into the first pocket and the colored "T" into the 2nd pocket.

16. 

    And now you can put it in and out whenever you want ... and you are finished.