Made: Shark
Color Changing Shark Tooth
Posted by Daniel P.
About
Share
You Will Need (3 things)
- 8 Jump Ring(s)
- 1 Chain
- 1 cup Resin
Steps (1 step, 180 minutes)
-
1
Left to Right
1. Mix the two silicon together. You have to work fast, you have about one minute before it starts to harden.
2. Roll a ball. flatten it, and push the shark tooth in. Let set for 20 minutes
3. Mix one to one of resin together, add a scoop of thermochromatic pigment and stir together. Pour into the mold. **Work fast.
4. The tooth should be set in about 5 minutes, remove from the mold and put a screw eye in the top. Make sure you go fast before it sets.
5. Repeat until you have enough teeth. I used 7
6. Attach the teeth to your chain with jump rings.