About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
1h00

Lucky Earth Necklace Tutorial
Put a bit of glitter from your favorite secret garden in this tiny bottle. The key unlocks the gate, the wishbone brings you luck while you visit. Don’t be daunted by the wordy directions, this necklace is all flattened tube crimps and simple stringing.

All supplies and tools are for sale at Ornamentea.com

Posted by Alison M. [Ornamentea.com] from Raleigh, North Carolina, United States • Published See Alison M. [Ornamentea.com]'s 26 projects »
PrintEmbed
  • Step 1

    Using your wire cutters cut four 20” strands of Soft Flex from your Trio. Cut two strands of your favorite color from the assortment.

  • How to make a hemp necklace. Lucky Earth Necklace - Step 2
    Step 2

    Thread all four strands through two size 4 crimp beads. Separate the four strands and wrap them around the neck of the glass bottle as shown.

  • How to make a hemp necklace. Lucky Earth Necklace - Step 3
    Step 3

    Tighten the crimp beads along the wire until the bottle is secure. Using your chain nose pliers flatten each crimp bead carefully.

  • How to make a hemp necklace. Lucky Earth Necklace - Step 4
    Step 4

    Thread a size 4 crimp bead on the wires on the right side of the key. Flatten crimp ¼ inch from previous flattened crimp. Thread two of the wires through the center of the 9 mm bead. Separate the two wires and pair them up with the wires on the outside of the bead. Thread each wire pair through a size 2 crimp. Flatten each size 2 crimp.

  • How to make a hemp necklace. Lucky Earth Necklace - Step 5
    Step 5

    Select one pair of wires and thread one of these wires through a single lentil bead. Thread both wires through a size 2 crimp and position crimp ½ inch from previous flattened crimp. Use your chain nose pliers to flatten size 2 crimp. Repeat this, alternating lentils and triangle beads separated by size 2 crimps until you have added 8 beads to this side of the necklace.

  • How to make a hemp necklace. Lucky Earth Necklace - Step 6
    Step 6

    Select the second set of wires emerging from the 9 mm Elaine Ray bead and repeat step 5, beginning first with a triangle bead and continuing until you have added 8 beads to the strand.

  • How to make a hemp necklace. Lucky Earth Necklace - Step 7
    Step 7

    Thread all four strands through a size 4 crimp bead and then through your extender chain. Thread the strands back through the crimp bead and position smoothly before flattening. Trim excess.

  • Step 8

    Repeat from step four to finish the other side of the necklace.

    Optional: If you wish to keep your bottle closed for eternity put a small amount of Diamond Glaze around the rim of the cork and press into place.

Made this project? Share your version »

Comments

Sara H.
Sara H.
Very nice! I'll post a link from my blog.

Sara
SoftFlexGirl
Reply
Heather C.
Heather C. · Mt Holly, North Carolina, US · 56 projects
this is very pretty!
Reply

More Projects