https://www.cutoutandkeep.net/projects/leather-and-denim-jeans • Posted by Lydia H.
I was really inspired a lot to make some pants with leather inserts. In particular there was a spread in Nylon magazine recently that I found really interesting. Of course, being me I decided that I needed to try my hand at making some of these must have pants myself. This was my inspiration spread. Lots of leather, lots of denim.
I was really inspired a lot to make some pants with leather inserts. In particular there was a spread in Nylon magazine recently that I found really interesting. Of course, being me I decided that I needed to try my hand at making some of these must have pants myself. This was my inspiration spread. Lots of leather, lots of denim.
So for starters, if you want to make a pair of these pants yourself, you are going to need some jeans and some leather. I had a pair of skinny jeans that I never wear anymore and a pair of leather pants that I had picked up at the thrift store. I decided to draw out my design before beginning. I really wanted to make sure that I liked the way my vision looked in "real life" before committing to it with fabric. Old Jeans.
Old Leather Pants.
Next I tried on the jeans, and measured how high up I wanted the leather to come. I wanted to make a diagonal leather insert. I laid the jeans out on my cutting mat and measured the diagonal line on both sides making sure that it was even.
I used the portion that I had removed from the jeans to measure how much leather I would need length wise and width wise. If the jeans you are using are too long for your legs make sure you take a proper measure or the pants will end up too long. Also I made the leather part slightly wider than the jean pieces I had removed as leather that is too tight is really tough to get into.
As you can see the leather above is WAY wider than the jean. I did not make them exactly the same width but left the leather slightly larger to make it easier to get into.
Now came the sewing. It is important that you make sure you have the pieces aligned properly before you begin to sew. Double, even triple check them. You don't want to be resewing through leather as this will weaken it and cause it to rip at the seam over time. Sew through all of the layers and be sure it is secure. Turn inside out and enjoy!!!