https://www.cutoutandkeep.net/projects/laced-back • Posted by BrittanyummyDGAF B.
1st: cut off the neck line about 1 in a half inch and the sleeves at the hem and the bottom at the hem. 2nd: Flip it over, use a white crayon or sharpie and draw a line straight down the center. Next draw lines straight across [about an inch from the side him. 3rd: cut the lines. Always start with the middle then the sides. 4th: Tie them together. Be careful, This cand be either to tight or to loose so don't make them tight until you know furshure it's the right size(: Finally, you have your lace back brittanyummyDGAF shirt<3 Enjoy<3
1st: cut off the neck line about 1 in a half inch and the sleeves at the hem and the bottom at the hem. 2nd: Flip it over, use a white crayon or sharpie and draw a line straight down the center. Next draw lines straight across [about an inch from the side him. 3rd: cut the lines. Always start with the middle then the sides. 4th: Tie them together. Be careful, This cand be either to tight or to loose so don't make them tight until you know furshure it's the right size(: Finally, you have your lace back brittanyummyDGAF shirt<3 Enjoy<3
1st: cut off the neck line about 1 in a half inch and the sleeves at the hem and the bottom at the hem.
2nd: Flip it over, use a white crayon or sharpie and draw a line straight down the center. Next draw lines straight across [about an inch from the side him.
3rd: cut the lines. Always start with the middle then the sides.
4th: Tie them together. Be careful, This cand be either to tight or to loose so don't make them tight until you know furshure it's the right size(: Finally, you have your lace back brittanyummyDGAF shirt<3 Enjoy<3