Knee High Boots Into Ankle High Boots

Transform your knee high boots to booties

Posted by Maria M.

About

I liked that shoes, but as a knee high they were kind of too sparkly for me so I decided to make an ankle high from them.

That is my first tutorial so sorry if I made any mistakes.

Share

You Will Need (8 things)

  • Scraps Of Fabric
  • Knee High Boots That You Want To Shorten
  • Scissors
  • Yarn Needle
  • Cord
  • 1 Glue Stick
  • Glue Gun
  • Laundry Clip(s)

Steps (7 steps, 60 minutes)

  1. 1

    Decide how high you want your boots to be. Then OPEN THE SHOE ZIPPER, add about one inch to your desired height and cut rest of the boot off. Remember to DO NOT CLOSE THE ZIPPER, because this zipping stuff will fall out.

  2. 2

    If your shoes are lined like mine, you have to get rid of the lining on that additional inch you’ve added to the desired height of the boot. Mine are studded so I had to remove the studs on that inch-wide area.

  3. 3

    Next you have to shorten the zipper to desired height of the shoe. Rip out the additional inch of the zipper and cut it off.

  4. 4

    Then use cord and needle to secure the zipper. Just stitch a kind of rectangle on the zippers last 3 “teeth” on its both sides. It will look better if cords colour matches the colour of shoe, but unfortunately I didn’t had a navy one so I used grey one.

  5. 5

    Now heat the glue gun and glue this additional inch of shank inside the shoe.

  6. 6

    Wrap the boot with a scrap of fabric and secure it with laundry clips so the glue could get it well. The fabric prevents the shank from dents that the clips could make. Leave it like that for a few minutes.

  7. 7

    Take off the laundry clips and scraps of fabric from the shoes. Enjoy your new ankle boots! :)