About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 12h00

Childs Jacket
Kaylie is a 3 buttoned up jacket with cables to the yoke and pleated at the waist.

Posted by Jody Long • Published 27th July 2015 • See Jody Long's 6 projects »

Downloads

109277_2F2015-06-10-164904-WC0019+pattern.pdf 1 MB [ Download ]

Print • Embed

Elena B. favorited Kaylie 03 Aug 00:03
Dot C. favorited Kaylie 30 Jul 11:55
Starr H. favorited Kaylie 28 Jul 12:12
Mysty J. commented on Kaylie 27 Jul 22:11
Mandy P. favorited Kaylie 27 Jul 15:47
Mandy P. added Kaylie to Jody Long designs 27 Jul 15:46
Jody Long published his project Kaylie 27 Jul 12:37

Step 1
Cable Panel A (worked over 6 sts)
Row 1: Knit. Row 2: Purl. Row 3: C6B. Row 4: Purl. Row 5: Knit. Row 6: Purl.
These 6 rows form patt and are rep throughout.
Cable Panel B (worked over 14 sts)
Row 1: P3, K8, P3.
Row 2: K3, P8, K3.
Row 3: P3, C4B, C4F, P3. Row 4: K3, P8, K3.
Row 5: P3, K8, P3.
Row 6: K3, P8, K3.
These 6 rows form patt and are rep throughout.
Cable Panel C (worked over 6 sts)
Row 1: Knit. Row 2: Purl. Row 3: C6F. Row 4: Purl. Row 5: Knit. Row 6: Purl.
These 6 rows form patt and are rep throughout.
Step 2
Using 3.75mm needles cast on 98 [104, 110, 114, 120] sts and work 6 rows in garter stitch (every row Knit).
Change to 4mm needles.

WorkinststbegwithaKrowuntil work measures 20 [23, 26, 29, 32] cm, ending with a ws row.
Pleat Row: K16 [18, 20, 21, 23], PL, PR, K18 [20, 22, 24, 26], PL, PR, K16 [18, 20, 21, 23]. 66 [72, 78, 82, 88] sts. BegwithaProwwork3rowsinst st.
Work 7 rows in garter stitch.
Next row: (ws) K7 [10, 13, 15, 18], *k1, m1, k2, m1, k5, (m1, k4) twice, rep from * twice, K1, m1, k2, m1, K8 [11, 14, 16, 19]. 80 [86, 92, 96, 102] sts.
Row 1: P7 [10, 13, 15, 18], work cable panel A over next 6 sts, cable panel B over next 14 sts, cable panel C over next 6 sts, cable panel
B over next 14 sts, cable panel A over next 6 sts, cable panel B over next 14 sts, cable panel C over next 6 sts, P7 [10, 13, 15, 18].
Row 2: K7 [10, 13, 15, 18], work cable panel C over next 6 sts, cable panel B over next 14 sts, cable panel A over next 6 sts, cable panel B over next 14 sts, cable panel C over next 6 sts, cable panel B over next 14 sts, cable panel A over next 6 sts, K7 [10, 13, 15, 18].
The last 2 rows set position for cable panels and rev st st. Keeping patt correct as set until work measures 26 [29, 32, 35, 38] cm, ending with a ws row.
Shape armholes
Keeping patt correct, cast off 3 sts at beg of next 2 rows.
Cast off 0 [2, 2, 2, 2] sts at beg of next 2 rows.
Dec 1 st at each end of next and 2 [1, 2, 2, 2] foll rs rows. 68 [72, 76, 80, 86] sts.
Cont straight until armhole measures 15 [16, 17, 18, 19] cms, ending with a ws row.
Shape shoulders
Keeping patt correct, cast off 4 [4, 4, 5, 5] sts at beg of next 4 [2, 2, 8, 4] rows,then5[5,5,0,6]stsatbegof next 4 [6, 6, 0, 4] rows. 32 [34, 38, 40, 42] sts. Cast off in patt.
Step 3
LEFT FRONT
Using 3.75mm needles cast on 47 [50, 53, 55, 58] sts and work 6 rows in garter stitch.
Change to 4mm needles and starting with a K row, work in st st until work measures 20 [23, 26, 29, 32] cm, ending with a ws row.
Pleat Row: K16 [18, 20, 21, 23], PL, PR, K7 [8, 9, 10, 11]. 31 [34, 37, 39, 42] sts.
Beg with a P row work 3 rows in st st.
Work 7 rows in garter stitch.
Next row: (ws) K5, m1, k2, m1, k1 (K4, m1) twice, k5, m1, k2, m1, K8 [11, 14, 16, 19]. 37 [40, 43, 45, 48] sts.
Row 1: P7 [10, 13, 15, 18], work cable panel A over next 6 sts, cable panel B over next 14 sts, cable panel C over next 6 sts, P4.
Row 2: K4, work cable panel C over next 6 sts, cable panel B over next 14 sts, cable panel A over next 6 sts, K7 [10, 13, 15, 18] sts.
The last 2 rows set position for cable panels and rev st st. Keeping patt correct as set until work measures 26 [29, 32, 35, 38] cm, ending with a ws row.
Shape armholes
Keeping patt correct, cast off 3 sts at beg of next row.
Patt 1 row.
For 2nd, 3rd, 4th and 5th sizes only Castoff[2,2,2,2]stsatbegofnext row.
Patt 1 row.
For all sizes
Dec1statbegofnextand2[1,2, 2, 2] foll rs rows. 31 [33, 35, 37, 40] sts.
Cont straight until armhole measures 12 [13, 14, 14, 15] cm, ending with a rs row.
Shape neck
Next row: cast off 6 [7, 9, 10, 11] sts, patt to end. 25 [26, 26, 27, 29] sts.
Patt 1 row.
Next row: cast off 3 sts, patt to end. 22 [23, 23, 24, 26] sts.
Patt 1 row.
Next row: cast off 2 sts, patt to end. 20 [21, 21, 22, 24] sts.
Patt 1 row. Dec1statbegofnextandfollalt row. 18 [19, 19, 20, 22] sts.
Work straight until armhole measures 15 [16, 17, 18, 19] cm, ending with a ws row.
Shape shoulders
Keeping patt correct, cast off 4 [4, 4, 5,5]stsatbegofnextandfoll1[0, 0, 3, 1] alt rows.
Patt 1 row.
Step 4
RIGHT FRONT
Using 3.75mm needles cast on 47 [50, 53, 55, 58] sts and work 6 rows in garter stitch.
Change to 4mm needles and starting with a K row, work in st st until work measures 20 [23, 26, 29, 32] cm, ending with a ws row.
Pleat Row: K7 [8, 9, 10, 11], PL, PR, K16 [18, 20, 21, 23]. 31 [34, 37, 39, 42] sts. BegwithaProwwork3rowsinst st.
Work 7 rows in garter stitch.
Next row: (ws) k8 [11, 14, 16, 19], m1, k2, m1, k5, (m1, k4) twice, k1, m1, k2, m1, k5. 37 [40, 43, 45, 48] sts.
Row 1: P4, work cable panel A over next 6 sts, cable panel B over next 14 sts, cable panel C over next 6 sts, P7 [10, 13, 15, 18].
Row 2: K7 [10, 13, 15, 18], work cable panel C over next 6 sts, cable panel B over next 14 sts, cable panel A over next 6 sts, K4.
The last 2 rows set position for cable panels and rev st st. Keeping patt correct as set until work measures 26 [29, 32, 35, 38] cm, ending with a rs row.
Shape armholes
Keeping patt correct, cast off 3 sts at beg of next row.
Patt 1 row.
For 2nd, 3rd, 4th and 5th sizes only Castoff[2,2,2,2]stsatbegofnext row.
Patt 1 row.
For all sizes
Dec1statbegofnextand2[1,2, 2, 2] foll ws rows. 31 [33, 35, 37, 40] sts.
Cont straight until armhole measures 12 [13, 14, 14, 15] cm, ending with a ws row.
Shape neck
Next row: cast off 6 [7, 9, 10, 11] sts, patt to end. 25 [26, 26, 27, 29] sts.
Patt 1 row.
Next row: cast off 3 sts, patt to end. 22 [23, 23, 24, 26] sts.
Patt 1 row.
Next row: cast off 2 sts, patt to end. 20 [21, 21, 22, 24] sts.
Patt 1 row.
Dec 1 st at beg of next and foll alt row. 18 [19, 19, 20, 22] sts.
Work straight until armhole measures 15 [16, 17, 18, 19] cm, ending with a rs row.
Shape shoulders
Keeping patt correct, cast off 4 [4, 4, 5, 5] sts at beg of next and foll 1 [0, 0, 3, 1] alt rows.
Patt 1 row.
Keeping patt correct, cast off 5 [5, 5, 0, 6] sts at beg of next and 1 [3, 3, 0, 2] foll alt rows.
Step 5
SLEEVES (Both Alike)
Using 3.75mm needles cast on 44 [46, 48, 50, 52] sts.
Row 1: P1 [0, 0, 0, 0], K2, *P2, K2, rep from * to last 1 [0, 0, 0, 0] sts, P1 [0, 0, 0, 0].
Row 2: K1 [0, 0, 0, 0], P2, *K2, P2, rep from * to last 1 [0, 0, 0, 0] sts, K1 [0, 0, 0, 0].
The last 2 rows form rib. Work a futher 7 rows.
Inc row: P9 [10, 11, 12, 13], K3, p1, m1p, p2, m1p, p1, K3, p1, m1p, p4, m1p, p1, k3, p1, m1p, p2, m1p, p1, k3, P9 [10, 11, 12, 13]. 50 [52, 54, 56, 58] sts.

Change to 4mm needles and proceed as foll:

Row 1: K9 [10, 11, 12, 13], P3, work cable panel A over next 6 sts, work cable panel B over next 14 sts, work cable panel C over next 6 sts, P3,K9 [10, 11, 12, 13].

Row 2: P9 [10, 11, 12, 13], K3, work cable panel C over next 6 sts, work cable panel B over next 14 sts, work cable panel A over next 6 sts, K3, P9 [10, 11, 12, 13].

The last 2 rows set position of cable panels and st st. Shape sides of sleeves by inc 1 st at each end of next and every foll 12th row until there are 58 [62, 66, 70, 74] sts, taking extra sts into st st.
Cont straight until work measures 24 [28, 31, 36, 39] cm, ending with a ws row.

Shape sleeve top
Keeping patt correct, cast off 3 sts at beg of next 4 rows then 2 sts at beg of next 4 [8, 10, 14, 14] rows then dec 1 st at each end of next and every foll rs row until 20 sts rem. Work 1 row. Cast off.
Step 6
LEFT FRONT BORDER
With rs facing and starting from the neck edge, using 3.75mm needles, pick up and K98 [102, 106, 110, 114] sts.
Row 1: P2, *K2, P2, rep from * to end.
Row 2: K2, *P2, K2, rep from * to end.
The last 2 rows form rib, work a further 7 rows. Cast off in rib.
Step 7
RIGHT FRONT BORDER
With rs facing and starting at lower edge, using 3.75mm needles, pick up and K98 [102, 106, 110, 114] sts. Row 1: P2, *K2, P2, rep from * to end.
Row 2: K2, *P2, K2, rep from * to end.
The last 2 rows form rib, work a further 3 rows.
Buttonhole row: rib to last 38 [38, 42, 42, 42] sts, cast off next 2 sts, *rib 13 [13, 15, 15, 15], cast off next 2 sts, rep from * once more, rib to end.
Next row: Rib, casting on 2 sts over the cast off 2 sts on previous row. Work 2 rows in rib. Cast off in rib.
Step 8
TO MAKE UP
Join shoulder seams.
COLLAR
With rs facing and using 3.75mm needles pick up and K106 [114, 118, 122, 130] sts evenly around neck edge, starting halfway across right front border and ending halfway across left hand border.
Row 1: P2, (K2, P2) to end.
Row 2: K2, (P2, K2) to end.
The last 2 rows form 2x2 rib.
Work a further 8 rows.
Change to 4mm needles and work a further 11 rows as set. Cast off neatly in rib.
TO MAKE UP
Sew in sleeves. Join side and sleeve seams. Sew on buttons top correspond with buttonholes.