https://www.cutoutandkeep.net/projects/jewelry-tree-3 • Posted by Laura M.
This project is fairly easy and is quite quick. Have fun!
This project is fairly easy and is quite quick. Have fun!
Find a tree branch! If you grab one straight off a tree be sure to let it dry out for a couple of days. I used a gum tree branch from my backyard.
Find a block of spare wood! I used two pieces of left over decking and used PVA to glue them together to create the perfect size for balance (this will depend on the size of you branch).
Mark the exact centre of your wooden block and drill a hole. The hole should be just the right size to fit the branch.
Using PVA fixate the branch into place and let dry.
Using spray paint prime the project with two coats and finish with two coats of white lacquer spray paint.
And voila! It is complete!