Cut Out + Keep

I Pod On The Go Case

For the iPod on the go.

https://www.cutoutandkeep.net/projects/ipod-on-the-go-case • Posted by Jessy

So my dad and I go for lots of rides on his motorcycle in the summer. And I like to listen to my iPod when we're riding. But it's really hard to change or pause my music while going 60mph with the wind whipping all around you, and trying not to drop it. I normally keep it in my jacket pocket, with a zipper, but getting it in and out without dropping it, also difficult. So I came up with this. I did this without taking pics, sorry, but it wasn't all that hard. So you'll get the idea. I sewed it all by hand, with triple stitching all over. I wanted to make sure the stitching wouldn't come apart while riding.

You will need

Project Budget
Free

Time

5 h 20

Difficulty

Pretty Easy
Medium dscf3557 Medium dscf3561 Medium dscf3571 Medium dscf3565 Medium dscf3577 Medium dscf3569

Description

So my dad and I go for lots of rides on his motorcycle in the summer. And I like to listen to my iPod when we're riding. But it's really hard to change or pause my music while going 60mph with the wind whipping all around you, and trying not to drop it. I normally keep it in my jacket pocket, with a zipper, but getting it in and out without dropping it, also difficult. So I came up with this. I did this without taking pics, sorry, but it wasn't all that hard. So you'll get the idea. I sewed it all by hand, with triple stitching all over. I wanted to make sure the stitching wouldn't come apart while riding.

Instructions

  1. Small dscf3581

    First I took two types of fabric and cut them larger then my iPod. Then I sewed the sides and bottom together.

  2. Small dscf3563

    I cut two holes at the bottom of the fabric for the Hold button, and the headphone jack. Then I stitched up the ends.

  3. Small dscf3557

    I traced the screen and dial of my iPod onto the front of the fabric. Then I cut it out and stitched up the ends. I noticed that after I stitched up the screen window and put my iPod in that the top of my iPod kept popping out through the window. I didn't think it would do that. Glad I checked before going on the bike!

  4. Small dscf3573

    So I got some plastic and cut three layers larger then the window on the bag. Then I sewed them on. That way I can see, and it won't fall out. Hopefully. Fingers crossed. XX

  5. I recommend using a clear plastic cup for the plastic. You want a plastic that you can sew through, but not something that's going to tear in two seconds. I used some cheap plastic, hence why I did three layers.

  6. Small dscf3575

    Then I took my shoelace and measured how long I wanted it to hang around my neck, and then sewed the ends to the inside of the bag. It hits right between my boobs and belly button. The bag will hang upside down, that way I don't have to bother turning it around while riding.

  7. Small dscf3567

    I took a safety pin and pined it to the top flap that will fold over. I pinched the pin shut with pliers. Then I sewed a shoelace piece to the middle of the back. I made sure not to sew through both layers, I used two fabrics so it would make a pocket. Now it ties shut, and I have a small pocket to keep my lip gloss in.

  8. Small dscf3569

    Now I have something to safely hold my iPod while riding the open road. And I can still see the screen and change songs and turn the volume up and down.

  9. NOTE: If you've never been on a motorcycle, and you someday want to ride one, I would tie your hair back really tight!! Like a tight french braid, bangs tucked under a bandana kinda tight. The wind blowing through your hair equals lots and lots knots!! I swear I ripped out half of my hair the first time I went riding.