How To Make Polaroid Magnet Frames

magnets have never looked so good

Posted by brittnimehlhoff

About

This project couldn’t be any easier! You only need a few supplies and a couple of minutes to make your own polaroid magnet frames. They are super addictive. Here’s what you need to recreate this project at home…

Share

You Will Need (4 things)

  • White Magnetic Sheet (the heavier the weight the better- you can find quite a few different types here on Amazon)
  • Ruler
  • Pencil(s) or Pen
  • Xacto Knife

Steps (6 steps, 20 minutes)

  1. 1

    Turn your magnetic sheet over (white side down). Black side facing up.

    Get out your ruler and draw a rectangle that is 4.25 x 3.5 inches.

  2. 2

    Use your ruler as a straight edge and cut the rectangle out of your magnet sheet with an Xacto knife.

    Now you need to cut out the inner box to make your magnet actually look like a polaroid.

  3. 3

    Measure and mark 1/4 inch around three sides of your rectangle (top, left, right).

    And then for the weighted bottom, measure 7/8 of an inch.

  4. 4

    Grab your straight edge and the Xacto again and cut out the inner box.

  5. 5

    Flip it over, grab a few photos and enjoy!

  6. 6

    Here's a picture of the finished polaroid magnets.