How To Make A Ribbon Rosette Brooch!

Cute, simple, quick, minimal sewing ... lots of glue! oooh!

Posted by Quartz

About

Just a nice and simple quick project that I made whilst crafting and playing with my new glue gun.

If you are having problems sourcing the ready-made pleated ribbon, please know that if you do have a sewing machine that you can find tutorials on the web of how to make your own! :)

Share

You Will Need (8 things)

  • Scissors
  • Glue Gun
  • Needle
  • Thread
  • 5 cm (square) Leather (or substitute)
  • 1 Brooch Pin
  • 30 cm Pleated Ribbon (depends on desired size of brooch)
  • 1 Cabochon

Steps (7 steps, 20 minutes)

  1. 1

    What you need:-

    *** Tools ***
    Glue Gun (or Farbri-tac glue)
    Scissors
    Needle and Thread

    *** Supplies ***
    Pleated Ribbon
    Brooch/pin back
    Piece of leather (or stiff felt/Lacey's stiff stuff - must be firm)
    Button or cabochon for centre focal piece

  2. 2

    First, cut your base material into a circle to use as the base of your brooch. (Remember, you don't need to use leather for this -- felt or Lacey's stiff stuff will work great!)

  3. 3

    Sew on the brooch back, while heating up your glue gun.

  4. 4

    Working from the outside in, run a rim of heated glue and stick your ribbon around the edge. Continue to glue and spiral the ribbon towards the inside of the circle. Once you are close to the middle, cut the ribbon to an end.

  5. 5

    If you are using a button with a shank for the middle focal, snip the shank with pliers so it will sit well in the middle.

  6. 6

    Simple, eh? Really, really, really simple!

    Remember if you do not want to make the pleated ribbon yourself, you can buy the ribbon already pleated from the internet (like I did!).

  7. 7

    Experiment with sizes, different ribbons, different buttons .... enjoy them as brooches, as keyrings, as handbag charms.... just ENJOY!