How To Make A Fishtail Loom Band Bracelet

About

You Will Need (4 things)

Steps (11 steps, 15 minutes)

1. 1

   What You Need:

   A Loom
   A Loom Hook
   About 60 Loom Bands (in two colours)
   An S Hook

2. 2

   Take the first loom band in your first colour and loop it like shown in the photo making sure to twist the band.

3. 3

   Now add a band in your second colour. this should be put straight onto the loom and now crossed in the middle.

4. 4

   Add another loop of the first colour straight onto the loom.

5. 5

   Using the loom hook, take the bottom band from the left side over the loom pin and into the middle.

6. 6

   Now to the same with the bottom loop on the right hand side.

7. 7

   Add another band of the second colour straight onto the loom.

8. 8

   And continue the pattern along adding a new band each time.

9. 9

   After a while the pattern will begin to emerge. Keep going until you reach the length you need.

10. 10

    To finish the Bracelet remove it from the loom and remove the 2 unused bands.

11. 11

    Add an S hook linking either end together and your bracelet is now ready to wear.