https://www.cutoutandkeep.net/projects/how-to-make-a-2-d-unicorn-plushie • Posted by christina
My friend said she wanted me to make a plush for her for Christmas. So I decided to make one. It's 3 inches tall, and 2.5 inches in width. Of course you can change the size of it if you like. Enjoy!(:
My friend said she wanted me to make a plush for her for Christmas. So I decided to make one. It's 3 inches tall, and 2.5 inches in width. Of course you can change the size of it if you like. Enjoy!(:
Draw the desire body of your unicorn, unless you have a template. Cut it out
Put your template or cut out on top of the felt and trace it.
Now after you traced your first one, flip the template or cut off over and trace it on the felt again.
Cut the shapes out with your scissors.
Put the shapes on top of each other and start sewing. Remember there is a bad side and good side, let the good side face up!
sew sew sew! :D
Remember to leave an open big enough to put the stuffing in! Then stuff! After you stuff, keep sewing until there are no openings to be seen!
Then use your yellow felt or the color of your choice, and cut 2 triangular shapes for the horn.
Put the two pieces together and sew them.
Put the horn just right above the head of the unicorn and sew it together.
After you finish sewing on the horn, use color felt of your choice to make the mane and tail. For the mane, I cut it out as mountains shapes.
For the tail, I can't explain the shape but it's curvy. Feel free to do your own designs for the mane and tail.
Now sew the mane on. Sew it from the horn to its neck.
Sew the tail on.
Then use the black felt to make the eyes. Cut two little circles.
Use the glue to glue one eye on the unicorn, and the other eye on the other side. Or you can sew the eyes on.
Then ta da! Your unicorn is finish. Mine is too simple, add some decorations if you like!!