https://www.cutoutandkeep.net/projects/how-to-knitting-loom • Posted by Zydonia
I met this loom for some time and is really easy to use, there are two sizes and can do many things, mainly scarves. There are also different stitches, if they like the project can e-mail, I do not know them all but I like the graphics of about 20.
I met this loom for some time and is really easy to use, there are two sizes and can do many things, mainly scarves. There are also different stitches, if they like the project can e-mail, I do not know them all but I like the graphics of about 20.
We need the wooden loom, hook and enough yarn, preferably be a bit thick We started doing a little loop that will put the first nail in the loom. In this case we will make a scarf, it's really easy!
He'll pass the yarn across each of the nails Once the yarn is entangled in all the nails, with the help of the back of the hook is pushed down to start the second round When finished give the 2 turns of yarn, as a precaution, lest we lose the points, a few laps entangle the thread to the table frame...
And now, we started to weave, with the hook to help us move in the first nail, the yarn from the bottom out, passing the yarn up, and so we continue with the following keys, all in order...
Having taken all, we give a new turn with the yarn for all nails, as we did at the start (one lap) And we, with the hook, taking the points ... lap after lap. Entangled, we pulled, tangled, we got ...
And the most dificult, the end. we will pass the point of the nail to the nail B, once the 2 together, the point below what we get above and is a single point, we're going to make and assemble it on the nail C, D repeat , E, F and so on until the last, which will make a knot to finish ... and voila!!!