Heart Thumb Print Necklace

HEART THUMB PRINT NECKLACE

Posted by KMOM14

About

Close up of heart (indentation is the thumb print

Close up of back of heart

I made this to be more of kid's project for a child to do for a loved one, but it could be made into a more grown-up version by using jump rings, clasps and a chain instead of ribbon.

The pictures I took really do not do it justice because it looks much better in person and you can easily see the ridges of the finger print.

Cost for each necklace is less than 50 cents each.

Share

You Will Need (7 things)

  • 1 block Fimo Clay - makes 4 hearts (on sale at Michael's .99)
  • Hearts ice cube Mould tray ($1.00 from Dollar Tree)
  • 18-24 inches of 1/8th inch wide Ribbon (97 cents per spool from Walmart), depending on length preferred
  • 2 Bead(s) with 1/8th inch opening or pony beads (on hand from broken Dollar store watch) for each necklace
  • Drinking Straw from bagged juice drink like Capri Sun (free as it was a used one)
  • Aluminum pie pan Baking Tin to bake the fimo (free as it was a used one)
  • Optional : Nodi Nail laquer pink with stars or ($1.00 from Dollar Plus) or any other nail polish

Steps (9 steps, 30 minutes)

  1. 1

    Works out best to divide the fimo into segments then kneed each piece in your hands for a few minutes to make it more pliabe, then press it into the mold and smooth off the top of it.

  2. 2

    Take out of the mold and place in the aluminum pie pan right side up. Have the child press their thumb print into the center of the heart. They will need to press very hard to make an indentation.

  3. 3

    You may need to shape the crease in the center of the hear on top up a little as the pressing will flatten it out. Use the side of the straw to press the crease back in the heart.

  4. 4

    Use the straw to punch a hole in the upper right hand side of the heart.

  5. 5

    Bake the fimo clay in the oven at 275 degrees for 15 mins. Do not overbake.

  6. 6

    After they have cooled off in a few minutes, paint the heart with the nail lacquer.

  7. 7

    Thread ribbon through heart front to back, then tie in a knot at the top.

  8. 8

    Close up of bead to show size of opening

  9. 9

    Thread one bead on each side of the ribbon.

    Tie a knot at the end of the the two pieces of ribbon and you are done!