Heart Record Earing Holder

Turn an ordinary record in to an earing holder.

https://www.cutoutandkeep.net/projects/heart-record-earing-holder-2 • Posted by Cat Morley

I found this heart shaped record at a crazy late night record fair. The songs on it were pretty rubbish, so after seeing this so I decided to do something useful with it. I attached it to the wall by putting a circle of foam (the one you get in packets of blank cds) at the back and then putting a screw through the middle. The earing holes were made by drilling in to the record.

You will need

Screw(s) Record Foam Circle Drill

Project Budget

Time

Difficulty

Description

I found this heart shaped record at a crazy late night record fair. The songs on it were pretty rubbish, so after seeing this so I decided to do something useful with it. I attached it to the wall by putting a circle of foam (the one you get in packets of blank cds) at the back and then putting a screw through the middle. The earing holes were made by drilling in to the record.

Instructions

1. Take a record and place it on a work surface with a block of wood below.

2. Take a drill and drill pairs of holes spaced around the record.

3. Take a circular peice of foam and place behind the record.

4. Screw the record to a wall.