Gypsy Chic Necklace And Earrings
Summer style for sunny days and hot nights!
Posted by Beads Unlimited
About
Carved wooden hearts and coin shaped pendants add a folksy feel to this design.
Share
You Will Need (15 things)
- 14 x 6mm Miracle Beads turquoise
- 2 x 6mm Wooden Beads deep purple
- Steampunk Pendant
- 1 x Trigger Clasp antique gold
- 2 x long ball Earring Wires antique gold
- 1 x Eyepin antique gold
- 21 x Headpins antique gold
- 17 m 5mm Jump Rings antique gold
- 9 m 8mm Jump Rings antique gold
- 4 Light Chain antique gold
- 5 x 6mm Miracle Beads orange
- 12 mm Miracle Bead orange
- 2 x size 8 Rocailles black
- Wooden Round Coins orange
- 1 x Multi Pliers
Steps (7 steps, 60 minutes)
-
1
Necklace
Thread the 12mm miracle
bead onto an eyepin. Trim the
eyepin 1cm above the bead, bend
into a loop, add an 8mm jump ring
and close the loop. Attach the
wooden heart to this jump ring. -
2
Thread a 6mm miracle bead
onto a headpin. Bend the headpin
into a loop approximately 1cm
above the bead. Hold the loop
with the pliers and wrap the
remaining wire tightly around the
headpin towards the top of the
bead. Repeat for all the miracle
beads. -
3
Cut five 1.5cm lengths of
chain. Use a 5mm jump ring to
add a thre’ penny charm and
turquoise beaded headpin to
the bottom of each length. -
4
Attach an 8mm jump ring to
one of the lengths of chain, add an
orange beaded headpin and
attach to the bottom of the wooden
heart. Make sure the beaded
headpins are sitting in front of the
chain and charm. Repeat to add
the other chains to the holes in the
bottom of the heart so they are a
symmetrical. -
5
Add a turquoise beaded
headpin to the 8mm jump
underneath the 12mm orange
miracle bead. -
6
Cut 72cm of chain. Thread
one end through an 8mm jump
ring. Add an 8mm jump ring and a
trigger clasp to one end and an
8mm jump ring to the other.
Attach the loose jump ring to the
top loop of the beaded eyepin. -
7
Earrings
Use 5mm jump rings to add the thre’ penny charms and turquoise
beaded headpins to the bottom of the wooden round coin.
Thread a rocaille and a 6mm wooden bead onto a headpin.
Trim 1cm above the bead bend into a loop and close.
Open a 5mm jump ring, thread
the wooden round coin and the
beaded headpin on and close the
jump ring.
Open another 5mm jump ring,
add the long ballwire and beaded
section and close the jump ring.
Repeat to make a pair.