Golden Rose Wire Ring.
Rose Ring Made From One Piece Of Wire.
Posted by SecretUndergroundCrafter
About
Just to let readers know this is my first tutorial. Please enjoy... and adapt to suit yopu.
Share
You Will Need (5 things)
- 15 in 18-20 gauge Wire
- Round Nose Pliers
- Flat Nose Pliers
- Wire Cutters
- Ring Mandrel or cylindrical object.
Steps (9 steps, 15 minutes)
-
1
1. Gather up all the equipment and keep it within reach.
-
2
2. Measure About 15-20 inches of Wire (38-50cm). Between 18 and 20 guage.
-
3
3.use round nose pliers to start twisting wool.
-
4
4.Layer wore over itself whilst winding useing flat nose pliers
-
5
5.Once the rose is big enough to hold use finger to twist it, keeping hold of the wire.
-
6
6.when your happy with the size of the rose use flat nose plier to bend the remaining wire 90 degrees away from the rose.
-
7
7. use the mandrel to shape the ring, wrap it around once or twice and wrap the rest of the wire back around the rose shape.
-
8
8.Make sure there are no sharp edges exposed, if they are bend he inwards and around with flat nose pliers.
-
9
Slip the ring onto your chosen finger and marvel at your creation.