Glue Gunned Bows How To

Instructions

• 

  Step 1

  okay, start off with a scrap piece of fabric, It doesn't matter the size because it depends on how big or small you want it. But I cut mine, 3.75in by 3.25 in.

• 

  Step 2

  Fold the fabric in half so now the opposite side is showing. From there, glue gun 2 of the sides so there is only one opening from the side.

• 

  Step 3

  Now flip the fabric inside out, so the correct side is now showing. Take some of the stuffing and add it to the inside. NOT A LOT, just a little. Make sure that the stuffing is spread out inside the bow so its not just a big clump.

• 

  Step 4

  Once you have the stuffing in; from the opening, fold a little crease, and add some glue along there and press it against the other side of the bow that is not glued.

• 

  Step 5

  Once it's all glued your result should look something like this.

• 

  Step 6

  Now take your piece of ribbon and wrap it around the center of your bow. Then at the end of the ribbon, add a dab of glue and press it against the part of the ribbon that is wrapped around the bow.

• 
  
• 

  Step 7

  Now take a clip preferably the plain silver ones that you can by at stores, and make a dab of glue at both ends and press it down to the bow, your result should look like this :]

• 

  Step 8

  Now you have a bow! yay ! haha, thats me in the picture with my bow :] , If you have any questions please leave a comment and Ill see what I can do to help. If you have any adjustments or ideas, please let me know ! :] thanks, and I hope I helped <333