Cut Out + Keep

Glow In The Dark Ufo

as part Eggcellent Upcycling competition

https://www.cutoutandkeep.net/projects/glow-in-the-dark-ufo • Posted by KMOM14

I made this for as part Eggcellent Upcycling competition that starts May 1st at Craftster where you make something creative out of plastic Easter Eggs. This is one of the few craft projects my son thinks is cool and it has now taken up residence in our bathroom as it hangs on light fixture in there because you can close the door and turn off the lights and it glows.

You will need

Project Budget
Cheap

Time

0 h 30

Difficulty

Nice & Simple
Medium ssl 2bglow 2bin 2bdark 2bside 2bview Medium ss glow in the dark 1240845948

Description

I made this for as part Eggcellent Upcycling competition that starts May 1st at Craftster where you make something creative out of plastic Easter Eggs. This is one of the few craft projects my son thinks is cool and it has now taken up residence in our bathroom as it hangs on light fixture in there because you can close the door and turn off the lights and it glows.

Instructions

  1. Small ss 2bglue 2bcds 2btogether

    As I had all of the items on hand already, it did not cost me anything out of pocket to make. Use craft glue to glue the two CDs together with the shiny side of each disc facing away from each other (if you have CDs with writing on the top you would glue the sides with writing together)

  2. Small ss1 2bcb 2bcenter 2bflush 2bwith 2bbottom 2bof 2begg

    Draw a circle on cardboard using the plastic egg, drawing around the egg and then about an inch out from the edge all the way around and then cut out the circles and put it on the egg flush against the edge.

  3. Small ss1 2bcb 2bring 2bon 2begg

    Use the hot glue gun to glue all around the edge of the egg on at the top to glue the cardboard securely to the egg.

  4. Small ss2 2bthread 2bthru 2bbattery 2bcase

    I then cut a length of crochet thread about 24 inches long and thread it through the battery case of the tealight, centering the thread and then tied a loose knot. You then put hot glue all around the top of the tealight (around the flame, but not on it) and put the flame through the hole in the CD and turn it upside down and firmly press the CDs in place and let dry.

  5. Small ss2 2bhole 2bin 2btop 2bwith 2bthumbtack

    Next make a hole in the top of the egg using a thumbtack and work it around so the hole is big enough that the thread can be pulled through it.

  6. Small ss2 2bthread 2bthrough 2btop

    Thread the crochet thread through the hole (note - this picture is to show as an example and is from another project, the thread for this project will have the tealight/CD attached) Cover the egg with aluminum foil (poke a hole in the center and thread the crochet thread through first and then glue it around the edges inside on the underneath side.

  7. Small ss 2bglow 2bin 2bthe 2bdark

    Paint the top and the bottom of the disc with glow in the dark paint - I used several coats and at least and hour between coats and painted each side separately. To turn the tealight, you just lift the top of the egg up and flip the switch.