https://www.cutoutandkeep.net/projects/glitter-v-necklace • Posted by Melissa T.
Condition a small amount of polymer clay (about 1cm x 1cm x 1cm) until soft and pliable.
Flatten the polymer clay until it is approximately 2mm thick. (You can use a jar to get smoother results.)
Cut a V-shaped pendant using a penknife.
Create a small hole on each end using a toothpick. Then, bake in oven according to the packet instructions. Leave to cool.
Apply clear glue on the top surface of the pendant.
Scatter glitter powder over the top surface. Flip the pendant over and apply clear glue on the other surface. Mop up excess the glitter powder. Leave to dry. (To get rid of excess glitter powder, go outdoors and tap the pendant gently against the floor or the wall until there is no loose powder.)
Attach a jump ring to each hole using pliers.
Add the silver chain to the jump rings using pliers.