Glitter And Gold Starburst Ring

About

You Will Need (9 things)

Steps (6 steps, 180 minutes)

1. 1

   First you'll need to gather all your materials to make your project. You'll need to find a flat object to depress into the glaze to make the star burst shape, I use a triangle pin to make the shape.

2. 2

   Roll out your clay until it’s around a quarter inch thick. Then use a small cookie cutter to cut out a circle. However, you can cut out any shape you want to like a square or oval.

3. 3

   Make a groove shape in the center of your clay. Use a flat object to push into the clay. I used a triangle pin, and I went around the edge of the circle of clay pushing it in so it made a star burst depression. Just make sure there is enough of a groove to put the glitter in.
   Bake according to the directions on your clay’s packaging. Then allow to cool.

4. 4

   Spray paint. I used an 18 kt. gold spray paint. Then allow to dry.

5. 5

   Pour lots of colorful glitter into the star burst depression. Make sure you add a black and white glitter to your mixture of colors, I find it helps balance it out and give it dimension.
   Mix your glaze with a little water so it's not very thick. Take your paint brush and brush the glaze onto your design, go slowly so you don’t end up with a big clump of glitter.
   Allow to dry.

6. 6

   Glue a ring back to your star burst.
   Once the glue dries, all that’s left is to put it on and style it up.