Garden Toolbelt Roll-Up

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  To begin cut a fabric square measuring 24" by 24".

• 

  Step 2

  Fold over the top edge of the fabric by 1" and sew it down. Fold up the top edge so that you have an 8" pouch at the bottom.

• 

  Step 3

  Cut a rectangle of fabric measuring 24" by 10". Place this below the 1" hem at the top and underneath the pouch at the bottom.

• 

  Step 4

  Stitch the rectangle neatly in place, below the 1" hem at the top and then sew along the bottom of the fabric rectangle.

• 

  Step 5

  Flip the fabric over and fold up the bottom edge so that it creates an 8" pouch at the back of the tool belt. Starting from below the 1" hem, sew down the left and right sides of the toolbelt, stitching the pouch in place.

• 

  Step 6

  Flip the pouch inside out, so that the fabric appears out the correct way.

• 

  Step 7

  Place your tools in the belt, and mark out where the pockets need to be with pins. Sew down these pouch lines, removing the pins as you go.

• 

  Step 8

  Cut two long lengths of ribbon, measuring about 25" long. Place the ribbons, at either side, inside the loop created by the 1" hem. Sew in place.

• 

  Step 9

  Cut two shorter lengths of ribbon, measuring about 10". Roll up your belt, with the tools in place, and stitch one ribbon to the edge of the belt and one where the edge of the belt meets the back of the belt.

• 

  Step 10

  You can use these two ribbons to tie up your belt in to a neat little roll-up.

Versions

+ Add your version

Posted by

catharine s.

Posted by

Marieke

Posted by

Cristina C.

Posted by

Anna H.

Comments

Leave your comment

LUVBUG : } 6th July 2008

I LUV THIS PROJECT..... THIS IS 1 ILL DEFINETLY BE ATTEMPTING.THANKS 4 POSTING IT, WITH ALL THE PICS, AND INFO MUAH:}......

Reply

stephie N. · United States, US · 5 projects 14th June 2008

i love it!

Reply

Cat Morley · London, GB · 1428 projects 30th June 2007

That's awesome, well done. I made my one for my mum's birthday too.

Reply

Cat

June 30th, 2007

Hi Cat! Thanks so much for the instructions for this. here's the one I made! http://www.catsavard.com/Toolbelt.html

Reply