About
how to make freezer paper stencil prints with scissors!
-
VillainousNinja favorited Freezer Paper Stencil Prints With Scissors
28 Jun 01:11
-
Kay T. favorited Freezer Paper Stencil Prints With Scissors
15 Nov 01:09
-
mmotse03 favorited Freezer Paper Stencil Prints With Scissors
04 Nov 16:42
-
Bayou Jenn added Freezer Paper Stencil Prints With Scissors to Crafts
15 Jun 23:57
-
GothicYolita favorited Freezer Paper Stencil Prints With Scissors
21 Jun 14:56
-
Step 1cut (or rip) a piece of freezer paper (must be freezer paper - with wax on one side only) to cover the area you want to print on.
-
Step 2draw one or more simple shapes that you’ll be able to cut out with scissors, on the paper side.
-
Step 3now cut out your shapes carefully, making minimal cuts to get to the shapes and between shapes. be sure not to accidentally cut out anything that shouldn’t be cut out (hope that makes sense).
-
Step 4now iron the stencil onto your fabric (wax side down, iron on high heat),
-
Step 5starting with the center, carefully working your way out to the edges…
-
Step 6make sure you iron the cut parts down so they are touching, so you don’t end up with stenciled lines connecting the shapes.
-
Step 7now paint in the stencils by dabbing in up+down motions around the outlines.
-
Step 8if you paint side-to-side you risk painting under the stencil and getting paint in the parts where the cut edges are touching.
-
Step 9once you’re done painting, you can pretty much peel off the stencil whenever you want - i usually wait 5-10 minutes; i know some people wait till it dries completely, but i’m way too impatient for that!
-
Step 10tah dah!
Comments
