Cut Out + Keep

Fork Bracelet

Fork + pliers = bracelet!

https://www.cutoutandkeep.net/projects/fork-bracelet-2 • Posted by Stacie G.

Check out my blog for more <a href="http://starsforstreetlights.blogspot.com/"> DIY! </a> My friend had one of these and I had to try and make it.

You will need

Project Budget
Free

Time

0 h 10

Difficulty

Pretty Easy
Medium tintype 1 Medium cu 1253837871

Description

Check out my blog for more <a href="http://starsforstreetlights.blogspot.com/"> DIY! </a> My friend had one of these and I had to try and make it.

Instructions

  1. Small dsc 0151 1253838100

    Step 1: Make sure you have sturdy pliers to hold the fork into place when you are using another pair of needlenose pliers to bend the prongs. TIP: Use a cheaper fork, they tend to be easier to bend.

  2. Small dsc 0150 1253838192

    Step 2: Use the needlenose pliers to bend the prongs to your desired shape/design. I have heard that if you heat up the fork with a blowtorch the prongs are more malleable, but I think that technique is a bit extreme unless you are making an extremely complicated design.

  3. Small dsc 0152 1253838218

    Now you have a bracelet! :)