Cut Out + Keep

Easy Pirate Boots

My boyfriend was a hit with them =D.

https://www.cutoutandkeep.net/projects/easy-pirate-boots • Posted by eccemullier

I was in a hurry for having a pair of these, but they were really expensive in here and actually, not that well done, so I made some myself. Hope this is useful for you =D

You will need

Project Budget
Cheap

Time

1 h 00

Difficulty

Nice & Simple
Medium escanear0069 1256748317 Medium imagen1 1256751467

Description

I was in a hurry for having a pair of these, but they were really expensive in here and actually, not that well done, so I made some myself. Hope this is useful for you =D

Instructions

  1. Small dsc00513 1256748812

    Make a pattern accoording to the measures you need, you'll need two patterns for each boot. The bottom measure is the size of your shoe plus 2cms. The height of the foot depends of the height of your ankle. Measure your ankle and cut it in two. Measure your calf through the wider part of it and cut it in half. The height of your boot is up to you, if you need them to reach your knee, measure the height from the floor to your knee. RECOMENDATION: Make them under your knee!!

  2. Once you have your four patterns, stitch left and right pattern for each boot.

  3. Small dsc00514 1256749112

    Stitch some elastic to the bottom of your boots, this will give it form and prevents that the front corner of the boot raises to the wrong place

  4. Small dsc00515 1256749233

    Measure the upper part of your boot, add 2 cms and make a rectangle that wide. The height depends on how thick you want them, I did mine of 7 cms and you'll need 4 of them.

  5. Small imagen1 1256751568

    Stitch the rectangles to each side of the boots from behind and stitch the corner that goes in front and you are done=D!!