Cut Out + Keep

Easy Pendant Lamp Diy

Make a pendant lamp to match any room!

https://www.cutoutandkeep.net/projects/easy-pendant-lamp-diy • Posted by Mark Montano

It's easy to make a hanging lamp to match any room in your home!

You will need

Project Budget
Cheap

Time

2 h 00

Difficulty

Nice & Simple
Medium 114551 2f2016 06 17 221314 square1%2blantern Medium 114551 2f2016 06 17 221320 square%2b3%2blantern

Description

It's easy to make a hanging lamp to match any room in your home!

Instructions

  1. Small 114551 2f2016 06 17 221417 collageneeds%2bpendant%2blamp

    E-6000 Glue & Spray Adhesive 2 Matching lampshades Fabric of choice Glue gun 1/2" wide bias tape Butcher paper, ruler and scissors

  2. Watch the video tutorial right here:

  3. Small 114551 2f2016 06 17 221421 collage%2bhowto%2bpendand

    1. & 2. Carefully roll the lampshade on the butcher paper (while tracing the edges with a pencil) to create the pattern and cut out 3. Pin and cut on folded fabric 4. & 5. Spray the lampshade with E-6000 Spray Adhesive and press the fabric to the shade 6. Hot glue the edge of the fabric down *use very little hot glue for this 7. Match the fabric seams and glue the shades together with E-6000 Glue *don't use hot glue because the heat of the bulbs may cause your glue to melt 8. . Hot glue the 1/2" bias trim around the side to cover the seams, center and edges of the pendant 9. Fold the end of the bias over 1/4" to give a clean finish