Easy Jewelry Making Ideas A Pair Of Diy Clip On Earrings
Easy jewelry making ideas-a pair of diy clip on earrings
Posted by
About
In today’s jewelry making ideas I come up with the diy clip on earrings. With pair of well-designed brass earring hooks, pieces of natural Jade Beads and a section of brass wire, entire project will be done within less than 5 minutes.
Share
You Will Need (3 things)
- Brass Wire
- Bead(s)
- Earring Hooks
Steps (5 steps, 120 minutes)
-
1
Materials needed in the diy clip on earrings:
Brass Earring Hooks
Jade Bead
0.5mm Brass Wire
Flat Nose Plier
Side Cutting Plier
-
2
Step1: make a wire wrapped bead cap
1. Snip a long segment of brass wire;
2. Thread the wire through your bead of choice, pulling out about 3cm long. With your fingers cross the two wire ends;
3. Use the round nose plier to grasp the shorter branch of wire and then form a loop around the plier. Next, wrap the leftover tail around the exposed neck;
4. Grip the longer end and continue wrapping down the wire around the exposed neck of bail;
-
3
5. Tuck the remaining tip into the last turn.
-
4
Step2: hang the bead onto earring hooks
Open the split of the loop on back of your earring hook finding and then hang on the above bead part. Close the loop and congratulations! You now have one of your diy clip on earrings.
-
5
Step3: make a complete pair
Do repeat the above processes for a whole pair.
Thus far, the entire jewelry making ideas had been elaborately presented. Its vintage appearance will fit all your outfits and make you the most standing out star among crowds. Along with the rage of retro fashion, diy clip on earrings are destined to make a return to comfort style as well.