Cut Out + Keep

Diy Treat Boxes

These little treat/snack boxes - handy for any event!

https://www.cutoutandkeep.net/projects/diy-treat-boxes • Posted by maritza_lisa

I used my Silhouette cutting machine (CAMEO) and its software (Silhouette Studio) to design and cut these little treat boxes!

You will need

Project Budget
Reasonably Priced

Time

0 h 10

Difficulty

So-so
Medium 105545 2f2014 11 13 152501 treatbox img1 Medium 105545 2f2014 11 13 152512 treatbox img3 Medium 105545 2f2014 11 13 152522 treatbox img2 Medium 105545 2f2014 11 13 152534 treatbox img4

Description

I used my Silhouette cutting machine (CAMEO) and its software (Silhouette Studio) to design and cut these little treat boxes!

Instructions

  1. Small 105545 2f2014 11 13 152955 treatbox step1

    After opening a new document in Silhouette Studio, I created a rectangle

  2. Small 105545 2f2014 11 13 153047 treatbox step3

    I then used the knife tool to cut all 4 corners off (each corner cut measured 1″x.5″)

  3. Small 105545 2f2014 11 13 153208 treatbox step4

    Once I deleted the cut corners, I resized my shape, then added the slits and fold lines using the Line and and Line Style tools

  4. Small 105545 2f2014 11 13 153251 treatbox cut

    I loaded my cardstock/mat, and sent to cut using cardstock settings

  5. Small 105545 2f2014 11 13 153339 treatbox fold

    I folded (dashed lines) and glued the ends together to create the completed box