Diy Jewellery Stash

Make an awesome functional wall decoration, that protects and organizes your jewellery !

Posted by Audrey W.

About

This jewellery box is the perfect place to store your necklaces, rings, bracelets, earrings and any other accessory you might have.

It's stylish, completely customized by your artistic state AND best of all concealed.
The artwork works as a cover lid to securely store your jewellery out of sigth and out of touch, while keeping them organized for longer.

Share

You Will Need (8 things)

  • Wooden Board
  • Hard Board
  • Artwork
  • Wood Screws
  • Carpentry Nails
  • Hinges
  • Magnet Clips
  • Screw Hooks

Steps (5 steps, 300 minutes)

  1. 1

    Using 2x 420:100:50mm boards and 2x 287:100:50 mm boards and some nails, assemble the wooden frame of the box.

    The shorter boards should sit in between the longer ones.

  2. 2

    With the frame lying on its face, put the hardboard (420:287mm) on top and nail securely or screw.

  3. 3

    Mark equally spaced positions for the three hinges on the inside of the cover and the lower end of the frame.
    Check if they align.
    Screw the cover first, then using somebody's help to hold it in position, attach it to the bottom of the frame.

  4. 4

    Draw out your internal distribution and screw in the hooks.

  5. 5

    Attach the magnet catches to the top end of the cover and the frame the same way you did with the hinges.

    That's it, you're ready.