Cut Out + Keep

Diy Furry Baby Booties

Let the wild rumpus begin!

https://www.cutoutandkeep.net/projects/diy-furry-baby-booties • Posted by PinkWeeds

You will need

Project Budget
Free

Time

0 h 45

Difficulty

Nice & Simple
Medium 1383426 10100398644276103 317892038 n Medium diy max 100

Description

Instructions

  1. Small diy max 088

    For the booties start by taking a pair of shoes that fit your child. Trace around and repeat for a second bootie.

  2. Small diy max 090

    Next trace just the top half of your slipper and measure around the heal of your slipper to get the correct length of the back of your booties. Cut out two little claw pieces of felt. Your pieces should look like this.

  3. Small diy max 091

    Fold over the top of your two long strips and sew down to make a casing for elastic.

  4. Small diy max 092

    Using a safety pin run your elastic through your casing and gather as you go.

  5. Small diy max 093

    Next pin the corner of heal to the corner of your toe. Repeat on the other side and sew. I didn't photograph this well so I apologize.

  6. Small diy max 095

    When you turn right side out you will have something like this.

  7. Small diy max 096

    Next pin your claws to the front of your sole and sandwich in-between the top of your shoes and the bottom.

  8. Small diy max 097

    Sew all the way around.

  9. Small diy max 098

    When you turn right side out it will look like this.

  10. Small diy max 099

    But at his point I realized I didn't hem the top of the toe, I turned the bootie back inside out and hand stitched. It was quick and took less than a minute.