Diy Embroidery Thread And Rhinestone Necklace
Fun combination of color and crystal in this DIY
Posted by Erin P.
About
Why spend $500 when you can make your own one-of-a-kind necklace using embroidery thread and costume jewelry? It's a great way to update old pieces in your jewelry box.
Share
You Will Need (3 things)
- Needle
- Embroidery Thread
- Costume Jewelry Necklace
Steps (7 steps, 40 minutes)
-
1
Tools and Materials:
Embroidery thread (I used about 9 skeins in a tonal range of pinks, coral, and fuschia)
Needle
Crystal/rhinestone necklace -
2
I began by unwinding the skeins and making three bundles (of three skeins each), a little over three times the length of my necklace.
-
3
I tied the ends together, keeping the bundles separate, then began braiding. You'll need to save a piece of thread about twice as long as the bundles for attaching the necklaces together later.
-
4
Continue until the braid is about 3 inches longer, on each end, from the necklace, then knot the loose strings. I trimmed down the remaining string on each end.
-
5
Next, I lined up the necklace with the braid, and made note of where I wanted the rhinestone necklace to become attached.
-
6
Thread up a needle with string, and tie the embroidery thread around some strings of the braid. I used the needle to sew the thread through the braid and wrapped in between the rhinestones. At the end of the necklace, I tied off the embroidery thread and tucked in the loose ends.
-
7
With jump rings, attach to the string a larger ring and clasp. You're done!