D.I.Y Cardboard Jewelry Organizer
Jewelry box
Posted by Arty Crafty Bee
About
This is a cardboard jewelry organizer.
It's not difficult to make and you Keep your jewelries safe and neat using this project.
Share
You Will Need (7 things)
- Cardboard
- Hot Glue Gun
- Paper Glue
- X Acto Knife
- Ruler
- Marker
- Wrapping Paper
Steps (11 steps, 60 minutes)
-
1
These are the materials you need for this project.
-
2
These are the templates for the box and the lid.
-
3
Take a square piece of cardboard, you can use rectangular if you want.
-
4
Using the template draw four lines in the edges (as shown in the picture). They must be equal in size and angle.
-
5
Cut along the lines.
-
6
Make some gentle slits on the cardboard, remember don't cut all the way through.
This helps you to fold the box nicely. -
7
I've made half cut lines on all four sides.
-
8
Cut out the corners as the picture. Cut along the yellow lines you see in the picture.
http://www.cutoutandkeep.net/projects/diy-cardboard-ring-organizerAs the link above band up the corners and glue them to make the box.
-
9
Using the same technique I've made a lid.
When you make the cuts on the corners keep it a bit smaller (1.5 - 2cm) than the box.
Then wrap it with fabric or wrapping paper. -
10
I've cut out two pieces of cardboard.
Wrap them with wrapping paper if you want. -
11
Then glue them in the box to make separators.
The box is ready.
Enjoy.