Diy Burberry Inspired Flower Clutch

STEP 1: First things first, print out your template (see attachment above!). Make sure your printer is set to 100% scale. Trace the fabric using the flowers you cut from the template. The left one is slightly smaller than the other so cut each size in equal measure as you’ll need both to create a flower. For matching fabric, I used another identical clutch that I cut up but you can find alternatives at your local fabric store or use the lining depending on how your clutch was made.
STEP 2: Now snip away! As you go, lay the bigger flowers on the clutch to know approximately how many you need to cut.
STEP 3: Once you’re happy with the way it looks, mark a small dot underneath the flowers so you know where to sew.
STEP 4: Now enter patience and elbow grease. Starting from the inside of your clutch, stitch through two flowers (smaller on top, larger underneath) and add a bead. Stitch everything in place. Repeat the process two times to have a flower center with three beads. Tie your ends inside the clutch to secure and hide loose threads. Annnnd, you’ve guessed it. Repeat. I recycled beads I bought years ago in a very 80′s jewelry making attempt. You can always cut up an old necklace you know you’ll never wear again or buy some fresh new ones. But hey, go team recycle!
And you’re now the proud owner of a Burberry inspired flower clutch. Scrunch it up and wear it effortlessly, Burberry style! Don’t forget to send me pictures on Twitter or Instagram if you end up trying this project. Use the #FreeSeriesMadeMeDoIt so I can find them. I’d love to see!