Die Kleine Krähe

hüpfen kleine Krähe

Posted by Azraels Requiem

About

This is my little crow, I listen to a lot of German Industrial music so I have the tendency to name my projects in German. A few months ago I came across these little LED lights (light emitting diodes) that are waterproof, now I wasn't so much interested in them being waterproof as much as the fact that the were small and button operated.

Share

You Will Need (8 things)

  • Plastic Ball
  • Crayola Model Magic
  • LED
  • Black Acrylic Paint
  • large Doll Eyes
  • Wood
  • Wire
  • Fabric

Steps (6 steps, 120 minutes)

  1. 1

    These eyes I scavenged off of an old plastic owl, the kind used to get rid of pests in your yard/garden since owls predate small animals. Drill small holes at first and slowly increase the size. PLEASE wear the proper safety gear because the plastic can and will melt and it is very very hot. I removed the white plastic backing from the eyes to allow light to pass through them.

  2. 2

    Here I have added some crayola model magic, I used white because I have a lot of it. I took a smooth piece of plastic and dragged it across his face to add a "feather-like" texture. Now you don't need to add nostrils but if you do just remember that birds have their nostrils up high whereas most reptiles have them down low. Allow this to dry a day or two for the best results.

  3. 3

    Here we have one of those lights. I like the shape of them so it became his body. There is a small tab you must bend in order to push it in and activate the light. I just cut it off because it gets in the way. The LED's themselves are somewhat colorless but depending on the casing the light cast will that color. I painted the outside of the casing black, this will not effect the light because the inner casing is still pink, I painted it so the pink wouldn't show through the fabric. I had a pair of gloves that I removed the fingers from so I used one to cover his body.

  4. 4

    I bent a single piece of coat hanger wire and stuck each end into a hole I drilled into the wooden base. I glued the LED into a hole at the base of the dolls head and glued his body to the wire legs.

  5. 5

    I glued a tail to the LED's tab, push the tail upwards and his eyes light up, pull it down and they turn off, be careful though because the tab may break. His feet are just little pieces of wood glued to the base by his feet and his wings are little wood embellishments used to decorate cabinets and other woodwork.

  6. 6

    Bear in mind that his eyes are an amber color and the light is pink so the light won't exactly be either color. Spooky little crow :)