Diamond Shape Earrings

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Draw out a diamond shape on a piece of cardboard to make a template. The size should be roughly 1cm.

• 

  Step 2

  Cut this out using a craft knife and a metal ruler to get sharp lines.

• 

  Step 3

  Place a piece of baking paper on a board. This makes it easier to transfer the shaped clay on to a baking sheet and stops it sticking. Roll out a small piece of oven bake clay to an even thickness of about 5mm.

• 

  Step 4

  Place the cardboard diamond template on the clay and press down lightly. This will stop it moving around as you cut. Using a sharp craft knife cut around the template. Repeat so you have you have two shapes the same.

• 

  Step 5

  Bake according to the instructions on the clay and allow to cool.

• 

  Step 6

  Use sandpaper or a nail file smooth the edges of the diamond shapes.

• 

  Step 7

  Using a fine line pen draw on lines to look like the facets on a cut diamond.

• 

  Step 8

  Once the ink is dry. Turn the shapes over and a dot of strong glue on to the back of each one.

• 

  Step 9

  Glue on your earring posts.

• 

  Step 10

  Allow the glue to dry and you are all done!

Comments

Leave your comment