Decoupaged Lids

Decoupaged Lids Tutorial!

https://www.cutoutandkeep.net/projects/decoupaged-lids • Posted by Blue Mama

Recently I made a project that used recycled (actually saved-from-the-recycling) plastic jugs. I didn't need the caps at the time but I kept them because I love circles and I thought I'd figure out something to do with them--and I did. I actually figured out three things to do with them: a magnet, a necklace or a pair of earrings! So grab some caps and choose whether you want to wear them or display them on your fridge!

You will need

Gallon jug Lid . If it was a lid for milk be sure to wash well with soap and water Decoupage medium (such as Mod Podge ) Heavy-duty Glue (such as Liquid Fusion) Varnish (such as Triple Thick) Brush Fabric or paper scraps Round button Magnet(s) OR: Set of large loop ear wires / Earring Hooks for earrings (pliers also needed if making earrings or necklace) Or : One large Jump Ring(s) Cord in length desired for a necklace Necklace Clasp(s) One set End Caps with loops. For necklace.

Project Budget

Time

Difficulty

Description

Recently I made a project that used recycled (actually saved-from-the-recycling) plastic jugs. I didn't need the caps at the time but I kept them because I love circles and I thought I'd figure out something to do with them--and I did. I actually figured out three things to do with them: a magnet, a necklace or a pair of earrings! So grab some caps and choose whether you want to wear them or display them on your fridge!

Instructions

1. 

   Apply a thin layer of decoupage medium to the cap with a brush. Press the paper or fabric firmly to attach.

2. 

   Trim carefully around edges if needed.

3. 

   Apply another thin layer to the top of the cap being sure to seal around the edges.

4. 

   Let dry and either apply a second layer of decoupage medium or a layer of varnish.

5. 

   Let dry overnight.

6. 

   Glue on the magnet or:

7. 

   Cut a length of cord and attach the end caps with loops and the clasp.

8. 

   Attach the large jump ring to the cap.

9. 

   (use an awl or a push pin to make a hole in the top of the cap) String cord through ring and:

10. 

    Voila!!!

11. 

    For earrings simply attach the ear wires to the caps or attach a jump ring to the caps and the ear wires to the jump ring! Put on, feel fabulous and enjoy their near-weightlessness!!!!!