Cot Quilt

Hearts all round

Posted by Carsmystical

About

To start off with,lay material with right sides facing pin together.Sew together with a 1/4" in seam,,overlock or zigzag edges,leaving top open for wading to be put in turn inside out so right side is facing, then slip wading inside,making sure its neat at ends and corners,pin into place, with the top opening fold material neatly under and then with a straight stitch, stitch all the way round the quilt. Cut the designs you want to put onto front of quilt,with the squares made of triangles, I cut 4 triangles of different colours and sewing them together,I also used long pieces of material, these can be sewn with a hem before you place them as borders, from each square at corners, then pin and sew around all designs, I used very close and wide zigzag. With the hearts I used small, medium and large and placed them overlapping and singles. Once happy with where they were placed, and pinned I started sewing with wide and close zigzag,I made sure the pins went through to back of quilt, so when I sewed it, I ended up with a reversible quilt.

Share

You Will Need (2 things)

  • When You Know What Design You Want, Cut Out In Contrasting Colours. I Used Alot Of Scraps That I Had. I Also Used Some Polar Fleece .
  • Material Measurements Depending On Size You Want To Make The Quilt, Remembering To Leave Enough For Seams. Wading Same Size As Material. Strips Of Material For Designs, Triangles Of Colours For Squares, Contrasting Thread, Scissors, Pins, Sewing Machine,

Steps (4 steps, 480 minutes)

  1. 1

    This was my first quilt some errors, but pretty happy with how it turned out.

  2. 2

    To make squares, measure four triangles, different colours and sew them together.

  3. 3

    the hearts I overlapped them and some of them single, when happy with where they were placed, sewed into place.

  4. 4

    Then all finished and sent to my eldest daughter to place in cot for Bubby due in Feb 2011.