About
pretty pendant
this is a version of an original i saw on etsy it is absolutely beautiful you can see it using the link below.
this is a fairly simple project to do, it just takes a little time to let it bake and then for the paint and glaze to dry. i only put that its reasonably priced because it is to buy all of the initial materials you need, buy you can make a ton really quick. but have fun and i hope you like this tutorial, its my first one!
Tags
-
Key West Witch added Corset Heart Pendant to Jewelry
30 Jun 04:46
-
mar *ૢ✧ ཻུ۪۪⸙͎ ೫ favorited Corset Heart Pendant
21 Sep 05:01
-
Coreen M. favorited Corset Heart Pendant
29 Sep 12:00
-
jackie c. favorited Corset Heart Pendant
20 Oct 23:22
-
harley r. added Corset Heart Pendant to Harley Quinn
11 Aug 19:52
-
mmotse03 favorited Corset Heart Pendant
07 May 02:41
-
Corinne S. favorited Corset Heart Pendant
13 Jan 21:30
-
Shaneece M. favorited Corset Heart Pendant
10 Dec 04:37
-
DocDoolittle added Corset Heart Pendant to Polymer Clay
16 Sep 15:51
-
Taylor P. favorited Corset Heart Pendant
14 Jul 21:40
-
Step 1gather supplies for first part:
glaze (nail polish for me on this 1)
roller
jump rings
cookie cutter
eye pins
clay -
Step 2knead the clay in your hand for about a minute to make it easier to use and roll about a quarter inch thick.
-
Step 3cut out the heart and mark with a pin or something small where you want the rings to be and so you get them matched up right, i didnt do it so straight on this one, but you get the point.
-
Step 4insert the jump rings with the seam into the clay, you dont want it showing it wont look as good, and put them in at a sort of angle so theyre not just sitting in there straight up.
-
Step 5use something to push the edges of the clay down over the rings to secure them in place, like a pencil tip or something. dont worry if its ugly you'll paint that later. and insert the two eyepins in the top as shown.
-
Step 6
now bake according to manufacturers directions...be sure to let cool when out of the oven, for like five minutes or so.
-
Step 7gather supplies for second part:
paint
brush
water
also:
glaze
ribbon
2 jump rings -
Step 8
when the heart is cool out of the oven, you want to take the eye pins out and put a little super glue on the post of them and then re insert to make sure they wont come out later.
-
Step 9sorry it switched to blue here, i did them on seperate days and didnt realize i took my pics of different ones.
paint the edges black and a little onto the top of the heart all the way around like so. -
Step 10now dilute some paint in the water.
-
Step 11paint with the diluted paint around the heart as you like. let dry.
-
Step 12using my nail polish i 'glazed' the heart, its easier with nail polish because the drying time is really quick, as opposed to clear polyurethane that i used to use.
-
Step 13finally, add the two jump rings on the top and lace it up with the ribbon and tie a bow and viola! i usually add a little guper glie in some inconspicuous plsaces to hold the bow together so it wont just fall apart.
well, there it is, i hope you all like it!! and happy crafting to you!
Versions
Comments
1
Books & Journals »
Red Like Roses, Blue Like Lilies
2
Branch & Twig Wreaths »
A Pretty Easter Wreath
